Easy Fixing Methods of Troubled Gas Grill despite Full Tank

built in gas grills.jpg

It is quite common for you to witness weird problems right after you change the gas tank of the built-in gas grill. After changing the tank, where you expect to get a proper grilling experience, you may end up getting guttering flames and no heat at all. This situation can make you frustrated, but no need to worry as we American Propane from Oklahoma City is here to help in anything and everything regarding grills and smokers.

Low heat and low flame are for the safety while handling the gas grills, but not appropriate always while you are trying to roast some meat. In the built-in gas grills, there are regulators to control the flame and heat automatically. Here we will discuss how you can make it perfect for cooking.

Know the Actual Process First

Ever wondered how does the gas grill work? Without knowing this you wouldn’t be able to fix the issues. When you open the valve of the tank, gas flows out of the tank through the gas pipe. The end of the pipe is divided into two sections. One is for the burner and the other is for controlling the valves that are set to the knobs on the grill. From the knob, the gas is mixed with oxygen for burning. In this situation, when it lights the mixture of gas it flames out the burner and heat and grill.

gas grill.jpg

Reason for Low Flame

The low flame is basically a safety precaution. While cooking it is indeed annoying, but it provides you protection if there is any gas leak. If the excess amount of gas comes out from the grill making a huge flame, it can be hazardous. The regulator responds on detection of the excessive flow of gas and it reduces the releasable amount of gas. This results in low flame and heat.

  • It can happen when the valve is opened very fast.

  • If the burner is on before the tank is opened, it can cause a low flame.

  • It can take place if the propane is shut off before the knobs.

Fixing Method

Reset the regulator to fix the problem of low heat and flame in your built-in gas grill. You can follow the below-mentioned process to do it.

  • Turn off everything in the grill, including gas flow and tank.

  • Disconnect the regulator from the tank.

  • Don’t start anything and let everything sit for five minutes.

  • Reconnect the regulator.

  • Open the valve slowly.

  • Wait for one minute.

  • Light the grill again.

gas grill.jpg

Fixing Further Issues

There are other ways to fix the problems of low heat and low flame in the built-in gas grill. Clean the burner pots, tubes and the vent brush, check for the leaks in the gas pipes and the fuel level, watch out the expiry date, rust and dents so that you can make sure if you need to replace it.

If you don’t feel confident to perform these steps or you cannot solve the problems even after performing those, it is time to call us. We have expert teams to inspect the appliances thoroughly and fix the problems if there is any.